EcoStrip is the ideal system solution for the heating of larger buildings such as industrial buildings, commercial buildings and sports centres. EcoStrip is suitable for both high and low installation.
EcoStrip does not contain fans or other moving parts, therefore air movements or feeling of discomfort caused by air noise and draught will be reduced. The need for ongoing maintenance is also minimised, which means that EcoStrip can be installed in areas that are difficult to access.Read More Download Brochure
Modula is an unobtrusive modular heating cassette. The cassettes are manufactured from 1.0mm gauge smooth-faced steel panels and are designed to be integrated within a standard 24mm exposed grid ceiling system. Copper pipes are expanded under pressure into extruded aluminium pipe seats to give high metal-to-metal contact and the pipe seats are then securely fixed to the rear of the steel panels.
Consequently, the arrangement delivers excellent heat transfer characteristics. Panels are insulated with 25mm thick class 'O'' foil wrapped mineral wool insulation 45kg/m3 density. The technology employed in the construction of the cassette results in very high heating capacity at low water mass flow rates.Read More SP Brochure HP Brochure
Frengerwarm is a system of custom made, smooth faced aluminium or steel panels manufactured to any length to suit the application. Panels can be wall mounted, free-hanging, surface mounted or recessed into a suspended ceiling system. Copper pipes are fixed rigidly to the rear of the aluminium panels and heat transfer is enhanced by extruded aluminium pipes seats. Panels are backed with 60mm thick foil-backed class '0' insulation, and are finished polyester powdercoat white RAL9010 as standard.
Frengerwarm has been specifically developed for use in schools, sports hallls, offices and healthcare environments, where a smooth faced panel with high heating capacity is the preferred solution. Frengerwarm is tested in accordance with the new harmonised European Standard EN 14037.Read More Download Brochure
The prison panels heat via water-carrying copper coils which are fixed within extruded Aluminium pipe seats. In turn, the pipe seats are securely bonded to the robust 2.0mm thick Steel outer casing. To optimise heat emission the heat is directed into the room by a layer of mineral wool insulation fitted to the reverse of the panel over the Copper coil. The units are made up into sets comprising at least one active section and a number of 'dummy' sections all to suit any particular environment and to simplify the installation process. All panels are finished in a tough polyester paint finish.Read More Download Brochure