Frengerwarm is a system of custom made, smooth faced aluminium or steel panels manufactured to any length to suit the application. Panels can be wall mounted, free-hanging, surface mounted or recessed into a suspended ceiling system. Copper pipes are fixed rigidly to the rear of the aluminium panels and heat transfer is enhanced by extruded aluminium pipes seats. Panels are backed with 60mm thick foil-backed class ‘0’ insulation, and are finished polyester powdercoat white RAL9010 as standard.
Frengerwarm has been specifically developed for use in schools, sports hallls, offices and healthcare environments, where a smooth faced panel with high heating capacity is the preferred solution. Frengerwarm is tested in accordance with the new harmonised European Standard EN 14037.
- Tested to EN 14037
- Modular system or perimeter system
- Smooth flat faced unobstrusive design
- Upto 588 W/m2 @ 55.5 dtK room (mwt - room temp)
- Standard polyester finish RAL 9010 (25% gloss)
- Can be customised to suit environment
- Additional colour options
- Aluminium or steel
- Can be surfaced mounted
- Can be wall mounted
water connections: 15mm OD EN1057:R250 Copper
weight : 37 kg/m2
water: horizontal or vertical, same end or opposite.
The unit has no moving parts, and therefore maintenance requirement is limited to periodic cleaning of the surface of the panel.
Standard fixing arrangement from the structural soffit using M6 threaded rod or suitable wiring located at a maximum of 1.5m centres along the length of any run panel.
Other fixing methods are available dependent on project/application requirements.
For simplicity and flexibility we recommend that flexible stainless steel braided EPDM hoses are used to connect the Frengerwam panel.